The easy, safe and low-cost way to connect NMEA 0183 system to a laptop PC (or any other device with a standard RS232 9-pin port).
The USG-1 ISO-Drive output and OPTO input provide full isolation, making installation simple and free from ground loops.
The NGW-1 allows NMEA 0183 instruments to receive vital data from the NMEA 2000 bus a into NMEA 2000 data and vice-versa.
The Actisense Active Depth/Speed/Temperature Module is the market-leading way to take analogue transducers into the digital age. Used with new or existing transducers fitted to a vessel, the Active DST Module digitises depth, speed and temperature transducer signals into NMEA data to deliver best-in-class seabed tracking.
The Actisense NMEA Buffer 2 (NBF-2) galvanically opto-isolates and buffers NMEA 0183 data to drive multiple NMEA devices, such as chart plotters, radars, and/or an on board PC or laptop. It is also ideal for safely interfacing an on board PC to NMEA 0183 equipment on a vessel.
Actisense are proud to announce the addition of NDC-4 and NDC-4-USB to the range. Now up to five OPTO isolated NMEA 0183 sources can be multiplied into a single stream*. Two flexible ISO-Drive outputs allow two different baud rates to be created.
Available as HSB or USB version.
* 4 inputs on the USB version as the USB interface acts as the 5th OPTO input.
Connect multiple NMEA devices to your PC, chart-plotter, radar, autopilot and more. The Actisense NDC-2 NMEA Multiplexer enables up to four NMEA devices to be multiplexed into one NMEA 0183 output. By filtering out data which is not required, reducing the quantity of data to prevent information overload, or blocking problem sentences. The NDC-2 data input ports are all compatible with baud rates up to 38400 (and one to 57600), making for compatibility with AIS systems and beyond.
